Arguments
 Number of events set to 5
 Trigger source set to 2
 Print period set to 1000000
 Run number set to 999999999
 Dac increment set to 65536
 Configuration file set to intDac.dat

TermIOs print()
  c_iflag = 0x0  c_oflag = 0x0  c_lflag = 0x0
  c_line = 0x0  c_cc[0-31] =  0x3 0x1c 0x7f 0x15 0x4 0x0 0x1 0x0 0x11 0x13 0x1a 0x0 0x12 0xf 0x17 0x16 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0
 Input flag: c_iflag = 0x0
 Output flag: c_oflag = 0x0
 Control flag: c_cflag = 0x18b2
  bflag = 0x1002, baud rate = 115200  c_ispeed = 0x0  c_ospeed = 0x0
  sflag = 0x30, size = 8 data bits
  Read enabled
  Local
  Protocol 1 stop bit, parity disabled
  Hardware flow control disabled
  Hangup disabled
 Local flag: c_lflag = 0x0
  Non-canonical
MessageDriver::print()  Device /dev/ttyS0
  File descriptor = 4
  Last send
 Message::print()  Bytes = 0x 00 00 00 00 00 00 00 00 
   Target = 0 = 0x0 = fe0
   Command = 0 = 0x0 = test
   Reply bit not set
   Address = 0 = 0x0
   Data = 0 = 0x0
  Last reply invalid 
DevbRS232::print() BaseRS232::print()
 Version         =  268440836 = 0x10001504 = 0b00010000 00000000 00010101 00000100
 Fifo status     =      65536 = 0x00010000 = 0b00000000 00000001 00000000 00000000
 Input enables   =          0 = 0x00000000 = 0b00000000 00000000 00000000 00000000
 Input status    =          7 = 0x00000007 = 0b00000000 00000000 00000000 00000111
 Input catch     =          0 = 0x00000000 = 0b00000000 00000000 00000000 00000000
 Output enables  =          3 = 0x00000003 = 0b00000000 00000000 00000000 00000011
 Trigger counter =          0 = 0x00000000 = 0b00000000 00000000 00000000 00000000
BendRS232::print() BaseRS232::print()
 Version         =  301995524 = 0x12001604 = 0b00010010 00000000 00010110 00000100
 Fifo status     = 4294967295 = 0xffffffff = 0b11111111 11111111 11111111 11111111
 Trigger control =          0 = 0x00000000 = 0b00000000 00000000 00000000 00000000
 Input enables   =          0 = 0x00000000 = 0b00000000 00000000 00000000 00000000
 Input status    =          2 = 0x00000002 = 0b00000000 00000000 00000000 00000010
 Input catch     =          0 = 0x00000000 = 0b00000000 00000000 00000000 00000000
 Output enables  =        255 = 0x000000ff = 0b00000000 00000000 00000000 11111111
 Trigger counter =          0 = 0x00000000 = 0b00000000 00000000 00000000 00000000
 Trigger osc     =          0 = 0x00000000 = 0b00000000 00000000 00000000 00000000
 Pre-trigger cnt =          0 = 0x00000000 = 0b00000000 00000000 00000000 00000000
FendRS232::print() BaseRS232::print()
 Version         =  318772740 = 0x13001604 = 0b00010011 00000000 00010110 00000100
 Fifo status     =      65536 = 0x00010000 = 0b00000000 00000001 00000000 00000000
 Fake event ctrl =          0 = 0x00000000 = 0b00000000 00000000 00000000 00000000
 Input status    =          0 = 0x00000000 = 0b00000000 00000000 00000000 00000000
 Input catch     =          0 = 0x00000000 = 0b00000000 00000000 00000000 00000000
 Trigger counter =          0 = 0x00000000 = 0b00000000 00000000 00000000 00000000
 VFE type        =       2571 = 0x00000a0b = 0b00000000 00000000 00001010 00001011
 FE version      =  318767158 = 0x13000036 = 0b00010011 00000000 00000000 00110110
CercFeConfigurationData::print()
 Calibration trigger pulse width 250 x 6.25ns, disabled
 Hold start 0 x 6.25ns, duration 54000 x 6.25ns, not inverted 
 VFE reset start 100 x 25ns, stop 200 x 25ns
 VFE srin start 300 x 25ns, stop 500 x 25ns
 VFE mplex clock start 400 x 25ns, mark 80 x 25ns, space 80 x 25ns, pulses 80
 VFE enable groups; enabled none; disabled 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11
 Top gain bit not set, bot gain bit not set
 ADC start 300 x 25ns, stop 13500 x 25ns
 CercFeAdcConfigurationData::print()  data = 0x9
  DAC input enabled
  Mode bits value 0
  Convert mode enabled
 ADC convert delay 30 x 25ns
 DAC0, data 0, enabled
 DAC1, data 0, enabled
 Fake event length 0, disabled
Trigger count = 1
Trigger count = 2
Trigger count = 3
Trigger count = 4
Trigger count = 5
CercFeConfigurationData::print()
 Calibration trigger pulse width 250 x 6.25ns, disabled
 Hold start 0 x 6.25ns, duration 54000 x 6.25ns, not inverted 
 VFE reset start 100 x 25ns, stop 200 x 25ns
 VFE srin start 300 x 25ns, stop 500 x 25ns
 VFE mplex clock start 400 x 25ns, mark 80 x 25ns, space 80 x 25ns, pulses 80
 VFE enable groups; enabled none; disabled 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11
 Top gain bit not set, bot gain bit not set
 ADC start 300 x 25ns, stop 13500 x 25ns
 CercFeAdcConfigurationData::print()  data = 0x9
  DAC input enabled
  Mode bits value 0
  Convert mode enabled
 ADC convert delay 30 x 25ns
 DAC0, data 0, enabled
 DAC1, data 0, enabled
 Fake event length 0, disabled
Trigger count = 6
Trigger count = 7
Trigger count = 8
Trigger count = 9
Trigger count = 10
Run ended at 1082637387 after 624 seconds