/detector/bLTransport/

BL Transport geometry control.

Sub-directories :

Commands :

material [choice]

Select Material of the BL Transport.

Available Geant4 state(s) : PreInit Idle

Parameters

choice

type s

shellMaterial [choice]

Select Material of the BLT Shell.

Available Geant4 state(s) : PreInit Idle

Parameters

choice

type s

yokeMaterial [choice]

Select Material of the BLT Yoke.

Available Geant4 state(s) : PreInit Idle

Parameters

choice

type s

rMax [fBLTransportRMax] [Unit]

Set Maxmum radius of the BL Transport.

Range : fBLTransportRMax>=0.

Available Geant4 state(s) : PreInit Idle

Parameters

fBLTransportRMax	type d
Unit	type s		Parameter candidates : pc km m cm mm um nm Ang fm parsec kilometer meter centimeter millimeter micrometer nanometer angstrom fermi

sizeZ [fBLTransportSizeZ] [Unit]

Set half length of the BL Transport.

Range : fBLTransportSizeZ>=0.

Available Geant4 state(s) : PreInit Idle

Parameters

fBLTransportSizeZ	type d
Unit	type s		Parameter candidates : pc km m cm mm um nm Ang fm parsec kilometer meter centimeter millimeter micrometer nanometer angstrom fermi

shellRMin [fBLTShellRMin] [Unit]

Set Minimum radius of the BLT Shell.

Range : fBLTShellRMin>=0.

Available Geant4 state(s) : PreInit Idle

Parameters

fBLTShellRMin	type d
Unit	type s		Parameter candidates : pc km m cm mm um nm Ang fm parsec kilometer meter centimeter millimeter micrometer nanometer angstrom fermi

shellRMax [fBLTShellRMax] [Unit]

Set Maxmum radius of the BLT Shell.

Range : fBLTShellRMax>=0.

Available Geant4 state(s) : PreInit Idle

Parameters

fBLTShellRMax	type d
Unit	type s		Parameter candidates : pc km m cm mm um nm Ang fm parsec kilometer meter centimeter millimeter micrometer nanometer angstrom fermi

shellSizeZ [fBLTShellSizeZ] [Unit]

Set half length of the BLT Shell.

Range : fBLTShellSizeZ>=0.

Available Geant4 state(s) : PreInit Idle

Parameters

fBLTShellSizeZ	type d
Unit	type s		Parameter candidates : pc km m cm mm um nm Ang fm parsec kilometer meter centimeter millimeter micrometer nanometer angstrom fermi

yokeRMin [fBLTYokeRMin] [Unit]

Set Minimum radius of the BLT Yoke.

Range : fBLTYokeRMin>=0.

Available Geant4 state(s) : PreInit Idle

Parameters

fBLTYokeRMin	type d
Unit	type s		Parameter candidates : pc km m cm mm um nm Ang fm parsec kilometer meter centimeter millimeter micrometer nanometer angstrom fermi

yokeRMax [fBLTYokeRMax] [Unit]

Set Maxmum radius of the BLT Yoke.

Range : fBLTYokeRMax>=0.

Available Geant4 state(s) : PreInit Idle

Parameters

fBLTYokeRMax	type d
Unit	type s		Parameter candidates : pc km m cm mm um nm Ang fm parsec kilometer meter centimeter millimeter micrometer nanometer angstrom fermi

yokeSizeZ [fBLTYokeSizeZ] [Unit]

Set half length of the BLT Yoke.

Range : fBLTYokeSizeZ>=0.

Available Geant4 state(s) : PreInit Idle

Parameters

fBLTYokeSizeZ	type d
Unit	type s		Parameter candidates : pc km m cm mm um nm Ang fm parsec kilometer meter centimeter millimeter micrometer nanometer angstrom fermi

collMaterial [choice]

Select Material of the BLT Collimator.

Available Geant4 state(s) : PreInit Idle

Parameters

choice

type s

collSizeZ [fCollSizeZ] [Unit]

Set half thickness of the BLT Collimator.

Range : fCollSizeZ>=0.

Available Geant4 state(s) : PreInit Idle

Parameters

fCollSizeZ	type d
Unit	type s		Parameter candidates : pc km m cm mm um nm Ang fm parsec kilometer meter centimeter millimeter micrometer nanometer angstrom fermi

collRMax [fCollRMax] [Unit]

Set inner bore radius of the BLT Collimator.

Range : fCollRMax>=0.

Available Geant4 state(s) : PreInit Idle

Parameters

fCollRMax	type d
Unit	type s		Parameter candidates : pc km m cm mm um nm Ang fm parsec kilometer meter centimeter millimeter micrometer nanometer angstrom fermi

collYMin [fCollYMin] [Unit]

Set Y position of the BLT YMin Collimator.

Available Geant4 state(s) : PreInit Idle

Parameters

fCollYMin	type d
Unit	type s		Parameter candidates : pc km m cm mm um nm Ang fm parsec kilometer meter centimeter millimeter micrometer nanometer angstrom fermi

wAbsorberMaterial [choice]

Select Material of the BLT Wedge Absorber.

Available Geant4 state(s) : PreInit Idle

Parameters

choice

type s

wAbsorberDZ1 [fBLTWAbsDZ1] [Unit]

Set half thickness of the BLT Wedge Absorber at PosY1.

Range : fBLTWAbsDZ1>=0.

Available Geant4 state(s) : PreInit Idle

Parameters

fBLTWAbsDZ1	type d
Unit	type s		Parameter candidates : pc km m cm mm um nm Ang fm parsec kilometer meter centimeter millimeter micrometer nanometer angstrom fermi

wAbsorberPosY1 [fBLTWAbsPosY1] [Unit]

Set Y position of the BLT Wedge Absorber lower edge.

Available Geant4 state(s) : PreInit Idle

Parameters

fBLTWAbsPosY1	type d
Unit	type s		Parameter candidates : pc km m cm mm um nm Ang fm parsec kilometer meter centimeter millimeter micrometer nanometer angstrom fermi

wAbsorberDZ2 [fBLTWAbsDZ2] [Unit]

Set half thickness of the BLT Wedge Absorber at PosY1.

Range : fBLTWAbsDZ2>=0.

Available Geant4 state(s) : PreInit Idle

Parameters

fBLTWAbsDZ2	type d
Unit	type s		Parameter candidates : pc km m cm mm um nm Ang fm parsec kilometer meter centimeter millimeter micrometer nanometer angstrom fermi

wAbsorberPosY2 [fBLTWAbsPosY2] [Unit]

Set Y position of the BLT Wedge Absorber lower edge.

Available Geant4 state(s) : PreInit Idle

Parameters

fBLTWAbsPosY2	type d
Unit	type s		Parameter candidates : pc km m cm mm um nm Ang fm parsec kilometer meter centimeter millimeter micrometer nanometer angstrom fermi

wAbsorberPosZ [fBLTWAbsPosZ] [Unit]

Set local Z position of the BLT Wedge Absorber,
where the local Z position is a relative position in BLZ cordinate.

Available Geant4 state(s) : PreInit Idle

Parameters

fBLTWAbsPosZ	type d
Unit	type s		Parameter candidates : pc km m cm mm um nm Ang fm parsec kilometer meter centimeter millimeter micrometer nanometer angstrom fermi