#acl IDSUsersGroup:read All:read

=== Level Summary ===
CCT=CERN Costing Tool

 * Level 1 - Building. 
  * Should correspond to Level 3(or 4) in CCT.
 * Level 2 - Module. 
  * Cryo-module level detail.  Each unique module should have costing info and this would correspond to the next level in the CCT PBS.
 * Level 3 - Component. 
  * This is the beamline element level, i.e. magnets, cavities, diagnostics, etc. Values in columns "Other Parameters" onwards are MADX parameters.
 * Level 4 - Tracking details.
  * Additional details relevant for tracking simulations. E.g. coil details for G4bl.Values in columns "Other Parameters" onwards are G4bl parameters.
 * Level 5 - Other components.
  * Additional components for costing. E.g. Specialised services, valves, etc.
 * Level 6 - Costing details.
  * Info for costing.
		
=== General Notes ===
 * Objects after level 1 and before first level 2 object must be > level 4.
 * Placement at entry not centre.
 * The size of things like solenoid and rf cavity refer to field volume.  Real size of solenoid  * should be reflected in the size of the cryomodule.  A separate object can be created at level 5 to specify the physical size of the magnet etc. as a function of the field volume size.
 * Variables should be specified in AccelParams sheet.
   * E.g Use a variable to specify the lengths of the cryomodules
	 

=== G4beamline Specific Commands ===
Specific commands for G4BL (e.g. setting the colour of objects) can be provided at level 4 in the columns "Other Parameters" onwards.  Below is a list of recognised keywords to be used for the column "Type":
 * monParams - parameters for virtual detector command.
 * rfParams - parameters for pillbox command.
 * solParams - parameters for solenoid command.
 * coil - parameters for coil command.  First parameter must be coilname.
 * tubs - parameters for tubs.