/detector/bLSolenoid/

BL Solenoid geometry control.

Sub-directories :

Commands :

material [choice]

Select Material of the BL Solenoid.

Available Geant4 state(s) : PreInit Idle

Parameters

choice

type s

shellMaterial [choice]

Select Material of the BLS Shell.

Available Geant4 state(s) : PreInit Idle

Parameters

choice

type s

yokeMaterial [choice]

Select Material of the BLS Yoke.

Available Geant4 state(s) : PreInit Idle

Parameters

choice

type s

rMax [fBLSolenoidRMax] [Unit]

Set Maxmum radius of the BL Solenoid.

Range : fBLSolenoidRMax>=0.

Available Geant4 state(s) : PreInit Idle

Parameters

fBLSolenoidRMax	type d
Unit	type s		Parameter candidates : pc km m cm mm um nm Ang fm parsec kilometer meter centimeter millimeter micrometer nanometer angstrom fermi

sizeZ [fBLSolenoidSizeZ] [Unit]

Set half length of the BL Solenoid.

Range : fBLSolenoidSizeZ>=0.

Available Geant4 state(s) : PreInit Idle

Parameters

fBLSolenoidSizeZ	type d
Unit	type s		Parameter candidates : pc km m cm mm um nm Ang fm parsec kilometer meter centimeter millimeter micrometer nanometer angstrom fermi

shellRMin [fBLSShellRMin] [Unit]

Set Minimum radius of the BLS Shell.

Range : fBLSShellRMin>=0.

Available Geant4 state(s) : PreInit Idle

Parameters

fBLSShellRMin	type d
Unit	type s		Parameter candidates : pc km m cm mm um nm Ang fm parsec kilometer meter centimeter millimeter micrometer nanometer angstrom fermi

shellRMax [fBLSShellRMax] [Unit]

Set Maxmum radius of the BLS Shell.

Range : fBLSShellRMax>=0.

Available Geant4 state(s) : PreInit Idle

Parameters

fBLSShellRMax	type d
Unit	type s		Parameter candidates : pc km m cm mm um nm Ang fm parsec kilometer meter centimeter millimeter micrometer nanometer angstrom fermi

shellSizeZ [fBLSShellSizeZ] [Unit]

Set half length of the BLS Shell.

Range : fBLSShellSizeZ>=0.

Available Geant4 state(s) : PreInit Idle

Parameters

fBLSShellSizeZ	type d
Unit	type s		Parameter candidates : pc km m cm mm um nm Ang fm parsec kilometer meter centimeter millimeter micrometer nanometer angstrom fermi

yokeRMin [fBLSYokeRMin] [Unit]

Set Minimum radius of the BLS Yoke.

Range : fBLSYokeRMin>=0.

Available Geant4 state(s) : PreInit Idle

Parameters

fBLSYokeRMin	type d
Unit	type s		Parameter candidates : pc km m cm mm um nm Ang fm parsec kilometer meter centimeter millimeter micrometer nanometer angstrom fermi

yokeRMax [fBLSYokeRMax] [Unit]

Set Maxmum radius of the BLS Yoke.

Range : fBLSYokeRMax>=0.

Available Geant4 state(s) : PreInit Idle

Parameters

fBLSYokeRMax	type d
Unit	type s		Parameter candidates : pc km m cm mm um nm Ang fm parsec kilometer meter centimeter millimeter micrometer nanometer angstrom fermi

yokeSizeZ [fBLSYokeSizeZ] [Unit]

Set half length of the BLS Yoke.

Range : fBLSYokeSizeZ>=0.

Available Geant4 state(s) : PreInit Idle

Parameters

fBLSYokeSizeZ	type d
Unit	type s		Parameter candidates : pc km m cm mm um nm Ang fm parsec kilometer meter centimeter millimeter micrometer nanometer angstrom fermi

collMaterial [choice]

Select Material of the BLS Collimator.

Available Geant4 state(s) : PreInit Idle

Parameters

choice

type s

collSizeZ [fCollSizeZ] [Unit]

Set half thickness of the BLS Collimator.

Range : fCollSizeZ>=0.

Available Geant4 state(s) : PreInit Idle

Parameters

fCollSizeZ	type d
Unit	type s		Parameter candidates : pc km m cm mm um nm Ang fm parsec kilometer meter centimeter millimeter micrometer nanometer angstrom fermi

collRMax [fCollRMax] [Unit]

Set inner bore radius of the BLS Collimator.

Range : fCollRMax>=0.

Available Geant4 state(s) : PreInit Idle

Parameters

fCollRMax	type d
Unit	type s		Parameter candidates : pc km m cm mm um nm Ang fm parsec kilometer meter centimeter millimeter micrometer nanometer angstrom fermi

collYMin [fCollYMin] [Unit]

Set Y position of the BLS YMin Collimator.

Available Geant4 state(s) : PreInit Idle

Parameters

fCollYMin	type d
Unit	type s		Parameter candidates : pc km m cm mm um nm Ang fm parsec kilometer meter centimeter millimeter micrometer nanometer angstrom fermi

wDegraderMaterial [choice]

Select Material of the BLS Wedge Degrader.

Available Geant4 state(s) : PreInit Idle

Parameters

choice

type s

wDegraderDZ1 [fBLSWDegDZ1] [Unit]

Set half thickness of the BLS Wedge Degrader at PosY1.

Range : fBLSWDegDZ1>=0.

Available Geant4 state(s) : PreInit Idle

Parameters

fBLSWDegDZ1	type d
Unit	type s		Parameter candidates : pc km m cm mm um nm Ang fm parsec kilometer meter centimeter millimeter micrometer nanometer angstrom fermi

wDegraderPosY1 [fBLSWDegPosY1] [Unit]

Set Y position of the BLS Wedge Degrader lower edge.

Available Geant4 state(s) : PreInit Idle

Parameters

fBLSWDegPosY1	type d
Unit	type s		Parameter candidates : pc km m cm mm um nm Ang fm parsec kilometer meter centimeter millimeter micrometer nanometer angstrom fermi

wDegraderDZ2 [fBLSWDegDZ2] [Unit]

Set half thickness of the BLS Wedge Degrader at PosY1.

Range : fBLSWDegDZ2>=0.

Available Geant4 state(s) : PreInit Idle

Parameters

fBLSWDegDZ2	type d
Unit	type s		Parameter candidates : pc km m cm mm um nm Ang fm parsec kilometer meter centimeter millimeter micrometer nanometer angstrom fermi

wDegraderPosY2 [fBLSWDegPosY2] [Unit]

Set Y position of the BLS Wedge Degrader lower edge.

Available Geant4 state(s) : PreInit Idle

Parameters

fBLSWDegPosY2	type d
Unit	type s		Parameter candidates : pc km m cm mm um nm Ang fm parsec kilometer meter centimeter millimeter micrometer nanometer angstrom fermi

wDegraderPosZ [fBLSWDegPosZ] [Unit]

Set local Z position of the BLS Wedge Degrader,
where the local Z position is a relative position in BLZ cordinate.

Available Geant4 state(s) : PreInit Idle

Parameters

fBLSWDegPosZ	type d
Unit	type s		Parameter candidates : pc km m cm mm um nm Ang fm parsec kilometer meter centimeter millimeter micrometer nanometer angstrom fermi