/detector/target/

Target geometry control.

Sub-directories :

Commands :

material [choice]

Select Material of the Target.

Available Geant4 state(s) : PreInit Idle

Parameters

choice

type s

rMax [fTDiskRMax] [Unit]

Set Maxmum small radius of the target disk.

Range : fTDiskRMax>=0.

Available Geant4 state(s) : PreInit Idle

Parameters

fTDiskRMax	type d
Unit	type s		Parameter candidates : pc km m cm mm um nm Ang fm parsec kilometer meter centimeter millimeter micrometer nanometer angstrom fermi

sizeZ [fTStripSizeZ] [Unit]

Set half thickness of target strip.

Range : fTStripSizeZ>=0.

Available Geant4 state(s) : PreInit Idle

Parameters

fTStripSizeZ	type d
Unit	type s		Parameter candidates : pc km m cm mm um nm Ang fm parsec kilometer meter centimeter millimeter micrometer nanometer angstrom fermi

stripAngle [fTStripAngle] [Unit]

Set tilt angle of strips.

Range : fTStripAngle>-90.&&fTStripAngle<90.

Available Geant4 state(s) : PreInit Idle

Parameters

fTStripAngle	type d
Unit	type s		Parameter candidates : rad mrad sr deg radian milliradian steradian degree

noOfStrips [fNoOfTStrips]

Set No. of strips.

Range : fNoOfTStrips>=1

Available Geant4 state(s) : PreInit Idle

Parameters

fNoOfTStrips

type i

noOfDisk [fNoOfTDisk]

Set the number of target disks.

Range : fNoOfTDisk>=0

Available Geant4 state(s) : PreInit Idle

Parameters

fNoOfTDisk

type i

diskPosition [fTDiskPosX] [fTDiskPosY] [fTDiskPosZ] [Unit]

Set the position of the target disk in a section.

Available Geant4 state(s) : PreInit Idle

Parameters

fTDiskPosX	type d
fTDiskPosY	type d
fTDiskPosZ	type d
Unit	type s		Parameter candidates : pc km m cm mm um nm Ang fm parsec kilometer meter centimeter millimeter micrometer nanometer angstrom fermi

spacing [fTSectionSizeZ] [Unit]

Set full length of the target disk spacing.

Range : fTSectionSizeZ>=0.

Available Geant4 state(s) : PreInit Idle

Parameters

fTSectionSizeZ	type d
Unit	type s		Parameter candidates : pc km m cm mm um nm Ang fm parsec kilometer meter centimeter millimeter micrometer nanometer angstrom fermi

position [fTRegionPosX] [fTRegionPosY] [fTRegionPosZ] [Unit]

Set the position of the target array.

Available Geant4 state(s) : PreInit Idle

Parameters

fTRegionPosX	type d
fTRegionPosY	type d
fTRegionPosZ	type d
Unit	type s		Parameter candidates : pc km m cm mm um nm Ang fm parsec kilometer meter centimeter millimeter micrometer nanometer angstrom fermi